Inert Gas Fire Suppression

Inert Gas Fire Suppression

Inert gas fire suppression systems & service.

With the push toward “Green”, inert gases are a good choice as they are the most green of all of the Clean Agents. Inert gases are defined as using one or more of the gasses Nitrogen, argon, or helium. CO2 is also found in one of the inert gas blends. Inert gasses work by removing the oxygen in the hazard to a point where it will not support a fire, but still high enough to support life.

Design considerations when using inert gasses are pressure venting and volume. It is critical to design the system to achieve the correct concentration, and not remove too much oxygen in the room. Plus, venting of inert gasses is important as it displaces the air volume in the hazard area. AFT can assist in determining which agent is best suited to protect the hazard area (includes detection and control for the system).

Contact Richard Jones at 1-704-588-3596 to discuss your inert gas fire suppression system needs.

Manufacturer Information

Click on the links below to learn more.

Solution Partners

Click the logos below to learn more about our solution partners.

“I’d like to extend my appreciation for the high standards your crew has set around safety, environmental stewardship and housekeeping. The commitment and professionalism shown by the folks in the field has been impressive. Your diligence continues to be a source of inspiration for the rest of the team. Thank you once again.”
Rod Graves
Operations Manager
TVA Ackerman Combined Cycle